This BMW 6 Series came in after a poor respray elsewhere left uneven colour and overspray. Revol Carz stripped the car back, repaired the surface, and resprayed it fully, finishing with a ZeTough Ceramic Paint Protection coating.
In the workshop
Spray PaintingPanel ResprayBMWZeTough Ceramic
🎨What the car came in for
This BMW 6 Series arrived at Revol Carz after a previous respray by another shop left the owner unhappy. The paintwork had overspray in several areas, uneven colour, and new scratches had appeared on top. The owner wanted the whole exterior redone properly.
Over seven days the car was stripped down, its panels patched and wet-sanded smooth, masked, then resprayed and polished. The photos below follow that work from arrival through to the before and after reveal, with the car sealed in a ZeTough Ceramic Paint Protection coating at the end.
Vehicle
BMW 6 Series
Work done
Full body respray
Finish
ZeTough Ceramic Paint Protection
In the workshop
7 days
📸From strip-down to the reveal
Day 1: the BMW 6 Series arrives, paintwork showing overspray and uneven colour from a prior job.Day 1: rear angle on arrival, the extent of the surface issues visible.Day 2: front panels removed as the car is stripped down for the respray.Day 2: trim off and components dismantled, ready for surface preparation.Day 3: body filler applied to damaged and uneven areas across the panels.Day 3: surface imperfections repaired and smoothed ahead of sanding.Day 4: wet-sanding the panels smooth, building a level foundation for paint.Day 5: masking begins, covering trim and glass before the spray booth.Day 5: masking completed with care around every edge and recess.Day 6: the new coat laid in the spray booth.Day 6: machine-polishing after painting to develop the gloss.Day 7: reassembly and final detailing as the car comes back together.Before: the BMW 6 Series at the start, paintwork marred by overspray and scratches.After: the same car, resprayed and sealed in ZeTough Ceramic Paint Protection.
🛠️What a full respray involves
A full respray is not just a change of colour. The result depends on what happens before any paint is laid: dismantling trim and parts, checking the surface for imperfections, patching chipped and uneven areas with filler, and wet-sanding until the foundation is smooth.
Surface stripped, patched, and wet-sanded smooth before any paint
Primer coat for a stable, long-lasting finish
Oven-baked, then sanded and polished to a deep shine
Sealed with a ZeTough Ceramic Paint Protection coating
At Revol Carz the panels are primed, wet-sanded again, then carefully masked before spraying. After the coat is laid and oven-baked, the paint is sanded once more, polished to bring up the shine, and the car is reassembled. A ZeTough Ceramic Paint Protection coating on top keeps the new paint protected and glossy for years.
Thinking about a respray?
Want this finish for your car?
Tell us what your paintwork looks like now and what you want it to be. The team will talk you through a full respray.