The paintwork on this Toyota Estima had oxidised, faded, and picked up stonechips and scratches across several panels. It came in for a full exterior respray and a ZeTough Ceramic Paint Protection coating.
In the workshop
Spray PaintingPanel ResprayToyotaZeTough Ceramic
🎨What the car came in for
This Toyota Estima came to Revol Carz with oxidised and faded paintwork, stonechips, and scratches spread across multiple panels. The owner wanted the finish properly restored, so the car was booked in for a full exterior respray.
Over seven days the team stripped the car down, patched and wet-sanded each panel, masked it up, and resprayed the whole exterior. The photos below follow that process from arrival through to the final before and after shots, with a ZeTough Ceramic Paint Protection coating applied to seal the new paint.
Vehicle
Toyota Estima
Work done
Full body respray
Finish
ZeTough Ceramic Paint Protection
In the workshop
7 days
📸From strip-down to the reveal
Day 1: the Estima arrives with faded, oxidised paint and stonechip damage.Day 2: strip-down begins, panels and trim removed for respray.Day 2: dismantling continues, all removable parts set aside.Day 2: bare panels exposed and checked for scratches and dents.Day 3: body filler worked into damaged areas across the panels.Day 3: sanding back filler and surface imperfections.Day 4: wet-sanding the entire exterior to a smooth, level finish.Day 4: panel surface checked closely before priming.Day 5: the Estima masked up, all non-painted surfaces protected.Day 6: new paint laid in the spray booth.Day 6: machine-polishing after the coat is baked and cured.Day 6: polished panel detail showing the finish quality.Before: the Estima's paintwork at the start of the job.After: the exterior resprayed and sealed with ZeTough Ceramic Paint Protection.
🛠️What a full respray involves
A full respray is not just a coat of paint. What determines the result is the preparation: dismantling trim and parts, finding every scratch, dent, and stonechip, patching them with filler, and wet-sanding until every panel is smooth and level.
Surface stripped, patched, and wet-sanded smooth before any paint
Primer coat for a stable, long-lasting finish
Oven-baked, then sanded and polished to a deep gloss
Sealed with a ZeTough Ceramic Paint Protection coating
At Revol Carz the prepared surface is primed, wet-sanded again, then masked before the colour coat goes on in the spray booth. After baking the paint is sanded, polished to gloss, and the car is reassembled. A ZeTough Ceramic Paint Protection coating on top keeps the new finish protected and glossy for years.
Thinking about a respray?
Want this finish for your car?
Tell us what your paintwork looks like now and what you want it to be. The team will talk you through a full respray.